ISO 3691-5:2014 gives safety requirements and the means for their verification for the following types of pedestrian-propelled trucks, equipped with load-handling devices for normal industrial duties, e.g. fork arms and platforms, or integrated attachments for special applications: pedestrian-propelled straddle stackers, pallet stackers, industrial trucks with capacities not exceeding 1 000 kg with manual or electrical battery-powered lifting, low-lift pallet trucks with lift height up to 300 mm and rated capacity up to 2 300 kg, scissor-lift pallet trucks with lift heights up to 1 000 mm or rated capacity up to 1 000 kg with manual or electrical battery-powered lifting. It is applicable to trucks provided with either manual or electrical battery-powered lifting, operating on smooth, level, hard surfaces.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
4.1 General
4.2 Propelling, steering
4.3 Load-handling controls
4.4 Lifting systems
4.5 Parking brake
4.6 Stability
4.7 Lateral stabilizers
4.8 Protection against crushing, shearing and entanglement points
4.9 Edges and angles
4.10 Protective devices
4.11 Additional requirements for trucks with battery-powered lifting
4.12 Lifting points
5 Verification of safety requirements and/or protective measures
5.1 General
5.2 Functional verification
5.3 Design verification (type test)
6 Information for use
6.1 General
6.2 Instruction handbooks
6.3 Marking
Annex A Method for measurement of forces, F (normative)
ISO 12100:2010 Safety of machinery -- General principles for design -- Risk assessment and risk reduction
ISO 13857:2008 Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 15870:2000 Powered industrial trucks -- Safety signs and hazard pictorials -- General principles
ISO 12100:2010 Safety of machinery -- General principles for design -- Risk assessment and risk reduction
ISO 13857:2008 Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 15870:2000 Powered industrial trucks -- Safety signs and hazard pictorials -- General principles
ISO 20898:2008 Industrial trucks -- Electrical requirements
ISO 2328:2011 Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions
ISO 3287:1999 Powered industrial trucks -- Symbols for operator controls and other displays
ISO 5053:1987 Powered industrial trucks -- Terminology