ISO 14116:2015 specifies the performance requirements for the limited flame spread properties of all materials, all material assemblies, and protective clothing in order to reduce the possibility of the clothing burning when in occasional and brief contact with small flames and thereby constituting a hazard. Additional requirements for clothing are also specified, including design requirements, mechanical requirements, marking, and information supplied by the manufacturer. When protection against heat hazards is necessary, in addition to protection against flame, this International Standard is not appropriate. International Standards such as ISO 11612 are to be used instead. A classification system is given for materials, material assemblies, and garments which are tested according to ISO 15025, Procedure A.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General and design requirements
5 Sampling, pre-treatment, and ageing
5.1 Sampling
5.2 Pre-treatment of material
5.3 Ageing
5.4 Conditioning
6 Performance requirements
6.1 Limited flame spread performance
6.2 Physical requirements
6.3 Dimensional change of textile materials
7 Classification
7.1 Requirements for limited flame spread index 1
7.2 Requirements for limited flame spread index 2
7.3 Requirements for limited flame spread index 3
8 Marking
8.1 Final index
8.2 Single-layer materials
8.3 Material assemblies
8.4 Garments
9 Information supplied by the manufacturer
Annex A Uncertainty of measurement (normative)
Annex B Determination of property values for rating and classification (normative)
ISO 13688:2013 Protective clothing -- General requirements
ISO 13934-1:2013 Textiles -- Tensile properties of fabrics -- Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13935-2:2014 Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 2: Determination of maximum force to seam rupture using the grab method
ISO 13688:2013 Protective clothing -- General requirements
ISO 13934-1:2013 Textiles -- Tensile properties of fabrics -- Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13935-2:2014 Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 2: Determination of maximum force to seam rupture using the grab method
ISO 13937-2:2000 Textiles -- Tear properties of fabrics -- Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
ISO 13938-1:1999 Textiles -- Bursting properties of fabrics -- Part 1: Hydraulic method for determination of bursting strength and bursting distension
ISO 13938-2:1999 Textiles -- Bursting properties of fabrics -- Part 2: Pneumatic method for determination of bursting strength and bursting distension
ISO 15025:2000 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread
ISO 5077:2007 Textiles -- Determination of dimensional change in washing and drying
ISO 9073-4:1997 Textiles -- Test methods for nonwovens -- Part 4: Determination of tear resistance