SFS-EN 10272:2016:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document specifies the technical delivery conditions for hot and cold formed stainless steel bars for the construction of pressure equipment supplied in accordance with one of the process routes and surface finishes listed in Table 5.
The general technical delivery conditions in EN 10021 also apply.
NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

77.040.01 Metallien aineenkoetus, yleistä »
77.140.30 Paineteräkset »
77.140.60 Terästangot »

Sidokset

Velvoittavat viittaukset

CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel

Näytä julkaisuun liittyvät velvoittavat viittaukset

CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10058:2018 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10079:2007 Definition of steel products
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10204:2004 Metallic products - Types of inspection documents
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN 10278:1999 Dimensions and tolerances of bright steel products
EN 10278:2023 Dimensions and tolerances of bright steel products of stainless and other special steels
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 14284:2022 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022)
EN ISO 148-1:2010 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009)
EN ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
EN ISO 6892-1:2009 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2009)
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
ISO 286-1:2010 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits

Piiloita näkyvistä julkaisuun liittyvät velvoittavat viittaukset

Tekninen komitea

CEN/TC 459/SC 7 Steels for pressure purposes »

Direktiivi

2014/68/EU

http://ec.europa.eu »

Vahvistuspäivä

05.08.2016

Julkaisupäivä

09.08.2016

Painos

2

Sivumäärä

39

Julkaisun kieli

englanti