Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification (ISO 14171:2016)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 14171:2016 specifies the requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of non-alloy and fine grain steels with minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One flux can be classified with different solid wire electrodes and tubular cored electrodes. The solid wire electrode is also classified separately based on chemical composition. It is a combined specification providing for classification utilizing a system based upon the yield strength and the average impact energy for weld metal of 47 J, or utilizing a system based upon the tensile strength and the average impact energy for weld metal of 27 J. a) Paragraphs and tables which carry the suffix letter "A" are applicable only to electrode/flux combinations and wire electrodes classified using the system based upon the yield strength and the average impact energy for weld metal of 47 J, in accordance with ISO 14171:2016. b) Clauses and tables which carry the suffix letter "B" are applicable only to electrode/flux combinations and wire electrodes classified using the system based upon the tensile strength and the average impact energy for weld metal of 27 J, in accordance with ISO 14171:2016. c) Clauses and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all electrode/flux combinations and wire electrodes classified in accordance with ISO 14171:2016. Fluxes for the single-run and two-run techniques are classified on the basis of the two-run technique.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Classification
4 Symbols and requirements
4.1 Symbol for the process
4.2 Symbol for tensile properties
4.3 Symbol for the impact properties of all-weld metal or two-run welded joint
4.4 Symbol for type of welding flux
4.5 Symbol for the chemical composition
4.6 Symbol for hydrogen content of deposited metal
ISO 13916:1996 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 14174:2012 Welding consumables -- Fluxes for submerged arc welding and electroslag welding -- Classification
ISO 14344:2010 Welding consumables -- Procurement of filler materials and fluxes
ISO 13916:1996 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 14174:2012 Welding consumables -- Fluxes for submerged arc welding and electroslag welding -- Classification
ISO 14344:2010 Welding consumables -- Procurement of filler materials and fluxes
ISO 15792-1:2000 Welding consumables -- Test methods -- Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
ISO 15792-2:2000 Welding consumables -- Test methods -- Part 2: Preparation of single-run and two-run technique test specimens in steel
ISO 3690:2012 Welding and allied processes -- Determination of hydrogen content in arc weld metal
ISO 544:2011 Welding consumables -- Technical delivery conditions for filler materials and fluxes -- Type of product, dimensions, tolerances and markings
ISO 6847:2013 Welding consumables -- Deposition of a weld metal pad for chemical analysis
ISO 80000-1:2009 Quantities and units -- Part 1: General