ISO 14405-1:2016 establishes the default specification operator (see ISO 17450-2) for linear size and defines a number of special specification operators for linear size for features of size, e.g. "cylinder", "sphere", "torus,"[1], "circle", "two parallel opposite planes", or "two parallel opposite straight lines". It also defines the specification modifiers and the drawing indications for these linear sizes. It covers the following linear sizes: a) local size: - two-point size; - spherical size; - section size; - portion size; b) global size: - direct global linear size: - least-squares size; - maximum inscribed size; - minimum circumscribed size; - minimax size; - indirect global linear size; c) calculated size: - circumference diameter; - area diameter; - volume diameter; d) rank-order size: - maximum size; - minimum size; - average size; - median size; - mid-range size; - range of sizes; - standard deviation of sizes. ISO 14405-1:2016 defines tolerances of linear sizes for the following: - a + and/or - limit deviation (e.g. 0/-0,019); - an upper limit of size (ULS) and/or lower limit of size (LLS) (e.g. 15,2 max., 12 min., or 30,2/30,181); - an ISO tolerance class code in accordance with ISO 286-1 (e.g. 10 h6); with or without modifiers. ISO 14405-1:2016 provides a set of tools to express several types of size characteristic. It does not present any information on the relationship between a function or a use and a size characteristic.
[1] A torus is a feature of size when its directrix diameter is fixed.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Specification modifiers and symbols
5 Default specification operator for size
5.1 General
5.2 ISO default specification operator for size
5.3 Drawing-specific default specification operator for size
6 Drawing indication for special specification operators for size
6.1 Basic specification
6.2 Indication of special specification operators
6.3 Tolerancing of fits on assembly drawings
7 Indication of the toleranced feature on which the size characteristic is defined
7.1 Complete toleranced linear feature of size
7.2 Specific fixed restricted portion of the feature of size
7.3 Any restricted portion of the feature of size of a specified length
7.4 Any cross section or any longitudinal section of a linear feature of size
7.5 Size characteristic in a specific cross section of a feature of size
7.6 Requirement applied individually for more than one feature of size
7.7 Requirement applied for more than one feature considered as one feature of size
7.8 Flexible/non-rigid parts
8 Complementary indication
Annex A Proportions and dimensions of graphical symbols (normative)
Annex B Overview diagram for linear size (informative)
Annex C Data handling with rank-order modifiers (informative)
Annex D Size characteristics (normative)
Annex E Graphical rules to locate and dimension the dimensional specification elements (normative)
Annex F Relation to the GPS matrix model (informative)
ISO 17450-1:2011 Geometrical product specifications (GPS) -- General concepts -- Part 1: Model for geometrical specification and verification
ISO 17450-2:2012 Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 17450-3:2016 Geometrical product specifications (GPS) -- General concepts -- Part 3: Toleranced features
ISO 17450-1:2011 Geometrical product specifications (GPS) -- General concepts -- Part 1: Model for geometrical specification and verification
ISO 17450-2:2012 Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 17450-3:2016 Geometrical product specifications (GPS) -- General concepts -- Part 3: Toleranced features
ISO 286-1:2010 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
ISO 8015:2011 Geometrical product specifications (GPS) -- Fundamentals -- Concepts, principles and rules
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules