This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, that are applicable to windows (including roof windows, roof windows with external fire resistance and door height windows), external pedestrian doorsets (and their assemblies, including unframed glass doorsets, escape route doorsets) and screens. Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034. This European Standard applies to: a) fixed windows or fixed lights, manually or power operated windows and door height windows, and screens for installation in vertical wall apertures and roof windows for installation in roofs, complete with: 1) related hardware, if any; 2) weather stripping, if any; 3) glazed apertures when intended to have glazed apertures; 4) with or without incorporated shutters and/or shutter boxes and/or blinds; and manually or power operated windows, roof windows, door height windows and screens that are: 5) fully or partially glazed including any non-transparent infill; 6) fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding); b) manually operated external pedestrian doorsets with flush or panelled leaves, complete with: 1) integral fanlights, if any; 2) adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The windows covered by this standard are not assessed regarding their ability to release (to open). The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: - rooflights according to EN 1873 and EN 14963; - curtain walling according to EN 13830; - industrial, commercial and garage doors and gates according to EN 13241; - internal pedestrian doorsets according to prEN 14351 2; - revolving doorsets; - power operated pedestrian doorsets according to EN 16361; - windows intended to be part of internal partition.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
CEN/TS 1187:2012 Test methods for external fire exposure to roofs
EN 1026:2016 Windows and doors - Air permeability - Test method
EN 1027:2016 Windows and doors - Water tightness - Test method
CEN/TS 1187:2012 Test methods for external fire exposure to roofs
EN 1026:2016 Windows and doors - Air permeability - Test method
EN 1027:2016 Windows and doors - Water tightness - Test method
EN 1121:2000 Doors - Behaviour between two different climates - Test method
EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
EN 1191:2012 Windows and doors - Resistance to repeated opening and closing - Test method
EN 1192:1999 Doors - Classification of strength requirements
EN 12046-1:2020 Operating forces - Test method - Part 1: Windows
EN 12046-2:2000 Operating forces - Test method - Part 2: Doors
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 12207:1999 Windows and doors - Air permeability - Classification
EN 12208:1999 Windows and doors - Watertightness - Classification
EN 12210:2016 Windows and doors - Resistance to wind load - Classification
EN 12211:2016 Windows and doors - Resistance to wind load - Test method
EN 12217:2015 Doors - Operating forces - Requirements and classification
EN 12219:1999 Doors - Climatic influences - Requirements and classification
EN 12400:2002 Windows and pedestrian doors - Mechanical durability - Requirements and classification
EN 12453:2000 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements
EN 12519:2004 Windows and pedestrian doors - Terminology
EN 12758:2002 Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties
EN 13049:2003 Windows - Soft and heavy body impact - Test method, safety requirements and classification
EN 13049:2023 Windows and doors - Soft and heavy body impact - Test method, safety requirements and classification
EN 13115:2020 Windows - Classification of mechanical properties - Racking, torsion and operating forces
EN 13123-1:2001 Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube
EN 13123-2:2004 Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test
EN 13124-1:2001 Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube
EN 13124-2:2004 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
EN 13141-1:2004 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
EN 13420:2011 Windows - Behaviour between different climates - Test method
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13501-5:2016 Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
EN 13823:2020 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 13823:2020+A1:2022 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 14179-2:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 14321-2:2005 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 14608:2004 Windows - Determination of the resistance to racking
EN 14609:2004 Windows - Determination of the resistance to static torsion
EN 1522:1998 Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification
EN 1523:1998 Windows, doors, shutters and blinds - Bullet resistance - Test method
EN 1627:2011+A1 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
EN 1628:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
EN 1628:2021 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
EN 1629:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
EN 1629:2021 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
EN 1630:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
EN 1630:2021 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 1935:2002 Building hardware - Single-axis hinges - Requirements and test methods
EN 410:2011 Glass in building - Determination of luminous and solar characteristics of glazing
EN 60335-2-103:2015 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN 947:1998 Hinged or pivoted doors - Determination of the resistance to vertical load
EN 948:1999 Hinged or pivoted doors - Determination of the resistance to static torsion
EN 949:1998 Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors
EN 950:1999 Door leaves - Determination of the resistance to hard body impact
EN IEC 60335-2-103:2023 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
EN IEC 61000-6-1:2019 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-1: Yleiset standardit. Häiriönsieto kotitalous-, toimisto- ja kevyen teollisuuden ympäristöissä
EN IEC 61000-6-3:2021 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments
EN ISO 10077-1:2006 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2006)
EN ISO 10077-2:2017 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
EN ISO 10140-1:2016 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)
EN ISO 10140-1:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2021)
EN ISO 10140-2:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010)
EN ISO 10140-2:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2021)
EN ISO 10140-3:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)
EN ISO 10140-3:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
EN ISO 10140-5:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)
EN ISO 10140-5:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)
EN ISO 11925-2:2020 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020)
EN ISO 12354-3:2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO 12354-3:2017)
EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
EN ISO 12543-2:2021 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2021)
EN ISO 12567-1:2010 Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
EN ISO 12567-2:2005 Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005)
EN ISO 52022-1:2017 Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017)
EN ISO 52022-3:2017 Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-3:2017)
EN ISO 717-1:2020 Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2020)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 1000:1992 SI units and recommendations for the use of their multiples and of certain other units
prEN 13633 Building hardware - Electrically controlled panic exit systems for use on escape routes - Requirements and test methods
prEN 13637 Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods