ISO 15236-1:2016 specifies the performance and constructional requirements applicable to conveyor belts having steel cords in the longitudinal direction as reinforcement. The requirements for construction given in Clause 6 apply to the design of single belts, as well as the design of complete type series such as those covered in ISO 15236-2.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and units
5 Belt design
5.1 Standard type
5.2 Conveyor belting having transverse reinforcements
5.3 Belt core
6 Design and construction
6.1 Belt strengths
6.2 Belt widths
6.3 Belt edge and supporting belt width
6.4 Number of cords
6.5 Cord pitch
6.6 Thickness of covers
6.7 Belt thickness
6.8 Belt length
7 Mechanical requirements
7.1 Breaking strength of the steel cord
7.2 Position of the steel cord in the conveyor belt
7.3 Number and spacing of cord joints
7.4 Cord pull-out force
7.5 Covers — Quality classification
7.6 Ageing of covers
7.7 Adhesion
7.8 Transverse reinforcements
7.9 Troughability
7.10 Tracking
7.11 Safety requirements
8 Sampling
9 Designation
10 Ordering data
11 Marking
Annex A Helpful information to be supplied by the purchaser (informative)
EN 12882:2015 Conveyor belts for general purpose use - Electrical and flammability safety requirements
EN 13827:2003 Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords
ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
EN 12882:2015 Conveyor belts for general purpose use - Electrical and flammability safety requirements
EN 13827:2003 Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords
ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
ISO 15236-2:2004 Steel cord conveyor belts -- Part 2: Preferred belt types
ISO 188:2011 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests
ISO 284:2012 Conveyor belts -- Electrical conductivity -- Specification and test method
ISO 340:2013 Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method
ISO 37:2011 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
ISO 4649:2010 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device
ISO 703:2007 Conveyor belts -- Transverse flexibility (troughability) -- Test method
ISO 7590:2009 Steel cord conveyor belts -- Methods for the determination of total thickness and cover thickness
ISO 7622-2:2015 Steel cord conveyor belts -- Longitudinal traction test -- Part 2: Measurement of tensile strength
ISO 7623:2015 Steel cord conveyor belts -- Cord-to-coating bond test -- Initial test and after thermal treatment
ISO 8094:2013 Steel cord conveyor belts -- Adhesion strength test of the cover to the core layer