Verkkokauppa
SFS-EN 15316-4-1:2017:en
Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems.
This standard (EN 15316 4 1) specifies:
- required inputs;
- a calculation method;
- resulting outputs;
- a method to take into account the energy performance of heat generation devices based on fuel combustion;
for space heating generation by combustion sub-systems (boilers, biomass), including control.
This standard specifies methods for the calculation of:
- thermal losses from the heating and the domestic hot water generation system;
- recoverable thermal losses for space heating from the heating and the domestic hot water generation system;
- auxiliary energy of the heating and the domestic hot water generation systems.
This standard specifies the energy performance calculation of water based heat generation sub-systems including control based on combustion of fuels ("boilers"), operating with conventional fossil fuels as well as renewable fuels. This standard does not cover sizing or inspection of boilers.
This standard is also applicable to heat generators for heating or for combined service as domestic hot water, ventilation, cooling and heating. Generators for domestic hot water only are taken into account into part M8-8.
This European Standard is the general standard on generation by combustion sub-systems (boilers, biomass) and is also intended for generation for domestic hot water production and/or space heating. These values are input data for calculation of the overall energy use according to EN ISO 52000 1 and EN 15316 1.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1.
NOTE 1 In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems.
This standard (EN 15316 4 1) specifies:
- required inputs;
- a calculation method;
- resulting outputs;
- a method to take into account the energy performance of heat generation devices based on fuel combustion;
for space heating generation by combustion sub-systems (boilers, biomass), including control.
This standard specifies methods for the calculation of:
- thermal losses from the heating and the domestic hot water generation system;
- recoverable thermal losses for space heating from the heating and the domestic hot water generation system;
- auxiliary energy of the heating and the domestic hot water generation systems.
This standard specifies the energy performance calculation of water based heat generation sub-systems including control based on combustion of fuels ("boilers"), operating with conventional fossil fuels as well as renewable fuels. This standard does not cover sizing or inspection of boilers.
This standard is also applicable to heat generators for heating or for combined service as domestic hot water, ventilation, cooling and heating. Generators for domestic hot water only are taken into account into part M8-8.
This European Standard is the general standard on generation by combustion sub-systems (boilers, biomass) and is also intended for generation for domestic hot water production and/or space heating. These values are input data for calculation of the overall energy use according to EN ISO 52000 1 and EN 15316 1.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1.
NOTE 1 In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
EN ISO 52016-1:2017 Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017)
EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
EN ISO 52016-1:2017 Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017)
Direktiivi
Vahvistuspäivä
26.05.2017
Julkaisupäivä
30.05.2017
Painos
2
Sivumäärä
52
Julkaisun kieli
englanti