Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 5: External concrete coatings (ISO 21809-5:2017)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 21809-5:2017 specifies the requirements for qualification, application, testing and handling of materials required for the application of reinforced concrete coating externally to either bare pipe or pre-coated pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623. The external application of concrete is primarily used for the negative buoyancy of pipes used in buried or submerged pipeline systems and/or for the mechanical protection of the pipe and its pre-coating. ISO 21809-5:2017 is applicable to concrete thicknesses of 25 mm or greater.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
ACI 308.1-98:1989
ASTM A 1064/A 1064M:2017 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A 641:1992
ACI 308.1-98:1989
ASTM A 1064/A 1064M:2017 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A 641:1992
ASTM A 810:2001 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
ASTM C 1157:2008
ASTM C 1176:2005
ASTM C 1240:2015 Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 128:2015 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM C 1435:1999
ASTM C 150:2007
ASTM C 1602/C 1602M:2012 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
ASTM C 1604/C 1604M:2005 Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
ASTM C 171:2016 Standard Specification for Sheet Materials for Curing Concrete
ASTM C 172:2008
ASTM C 309:2011 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
ASTM C 31:1991
ASTM C 330:2005
ASTM C 331:2005
ASTM C 332:2009 Standard Specification for Lightweight Aggregates for Insulating Concrete
ASTM C 33:2007
ASTM C 39:1996
ASTM C 40:2004
ASTM C 42:1994
ASTM C 494:1992
ASTM C 595:2008
ASTM C 617:2010
ASTM C 618:2015 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
ASTM C 637:2014 Standard Specification for Aggregates for Radiation-Shielding Concrete
ASTM C 642:2013 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
ASTM C 989:2010
ASTM D 2216:2010 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
ASTM D 4643:2017 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
ASTM D 4959:2016 Standard Test Method for Determination of Water Content of Soil By Direct Heating
ASTM D 6176:1997 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 10204:2004 Metallic products - Types of inspection documents
EN 10244-2:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
EN 10244-2:2023 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
EN 12390-2:2019 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-7:2019 Testing hardened concrete - Part 7: Density of hardened concrete
EN 12504-1:2019 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
EN 12620:2002 Aggregates for concrete
EN 12620:2013 Aggregates for concrete
EN 13055:2016 Lightweight aggregates
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 206:2013+A2:2021 Concrete - Specification, performance, production and conformity
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
ISO 10474:2013 Steel and steel products -- Inspection documents
ISO 16120-2:2017 Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod
ISO 1920-5:2004 Testing of concrete -- Part 5: Properties of hardened concrete other than strength
ISO 80000-1:2009 Quantities and units -- Part 1: General