Verkkokauppa
SFS-EN ISO 10848-3:2017:en
Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms. Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017)
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components.
ISO 10848-3:2017 specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848-1) when the junction has a substantial influence.
Laboratory measurements are used to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission sufficiently; hence, the results can only be considered representative of the performance of that junction when installed in that particular building structure.
ISO 10848-3:2017 is referred to in ISO 10848-1:2017, 4.5 as being a supporting part to the frame document and applies to Type B elements that are structurally connected as defined in ISO 10848-1.
The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354-1 and ISO 12354-2.
The relevant quantity to be measured is selected according to ISO 10848-1:2017, 4.5. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn,f,ij and/or Ln,f,ij and/or Lne0,f,ij) or as the normalized direction-average velocity level difference of a junction. Dn,f,ij, Ln,f,ij, Lne0,f,ij and depend on the actual dimensions of the elements.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components.
ISO 10848-3:2017 specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848-1) when the junction has a substantial influence.
Laboratory measurements are used to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission sufficiently; hence, the results can only be considered representative of the performance of that junction when installed in that particular building structure.
ISO 10848-3:2017 is referred to in ISO 10848-1:2017, 4.5 as being a supporting part to the frame document and applies to Type B elements that are structurally connected as defined in ISO 10848-1.
The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354-1 and ISO 12354-2.
The relevant quantity to be measured is selected according to ISO 10848-1:2017, 4.5. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn,f,ij and/or Ln,f,ij and/or Lne0,f,ij) or as the normalized direction-average velocity level difference of a junction. Dn,f,ij, Ln,f,ij, Lne0,f,ij and depend on the actual dimensions of the elements.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
ISO 10848-1:2017 Acoustics -- Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms -- Part 1: Frame document
ISO 12999-1:2014 Acoustics -- Determination and application of measurement uncertainties in building acoustics -- Part 1: Sound insulation
ISO 717-1:2013 Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation
ISO 12999-1:2014 Acoustics -- Determination and application of measurement uncertainties in building acoustics -- Part 1: Sound insulation
ISO 717-1:2013 Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation
Direktiivi
93/68/EEC Neuvoston direktiivi 93/68/ETY, annettu 22 päivänä heinäkuuta 1993, direktiivien 87/404/ETY (yksinkertaiset paineastiat), 88/378/ETY (lelujen turvallisuus), 89/106/ETY (rakennusalan tuotteet), 89/336/ETY sähkömagneettinen yhteensopivuus), 98/37/EY (koneet), 89/686/ETY (henkilönsuojaimet), 90/384/ETY (muut kuin itsetoimivat vaa'at), 90/385/ETY (aktiiviset implantoitavat lääkinnälliset laitteet), 90/396/ETY (kaasumaisia polttoaineita käyttävät laitteet), 98/13/EY (telepäätelaitteet), 92/42/ETY (uudet
nestemäisiä tai kaasumaisia polttoaineita käyttävät kuumavesikattilat) ja 73/23/ETY (tietyllä jännitealueella toimivat sähkölaitteet) muuttamisesta
http://ec.europa.eu »
nestemäisiä tai kaasumaisia polttoaineita käyttävät kuumavesikattilat) ja 73/23/ETY (tietyllä jännitealueella toimivat sähkölaitteet) muuttamisesta
http://ec.europa.eu »
Vahvistuspäivä
03.11.2017
Julkaisupäivä
07.11.2017
Painos
2
Sivumäärä
14
Julkaisun kieli
englanti