SFS-EN 1337-4 + AC:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This part of EN 1337 specifies the requirements for the design and manufacture of single and multiple roller bearings, in which the roller axis is horizontal. In order to accommodate displacements parallel to the roller axis roller bearings can be combined with sliding elements in accordance with EN 1337-2. To permit rotation about the axis perpendicular to the roller axis or about both axes, as for multiple roller bearings, the roller bearings can be combined with bearings from other parts of EN 1337.
This part of EN 1337 does not apply to roller bearings made with materials other than those specified in clause 5.
Bearings which are subjected to rotation greater than 0,05 rad resulting from the characteristic combination of actions are outside the scope of this part of EN 1337.

Tämän julkaisun valmistelusta Suomessa vastaa Väylä, puh. 0295 343000 (vaihde).

Tuoteryhmä(t)

93.020 Maanrakennuskohteet. Kaivannot. Perustukset. Maanalaiset rakennuskohteet »
90.021.50 Rakenteelliset laakerit »
91.010.30 Tekniset näkökohdat »

Sidokset

Velvoittavat viittaukset

EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10204:2004 Metallic products - Types of inspection documents

EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10204:2004 Metallic products - Types of inspection documents
EN 1337-10:2003 Structural Bearings - Part 10: Inspection and maintenance
EN 1337-1:2000 Structural bearings - Part 1: General design rules
EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
EN 1337-7:2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
EN 1337-9:1997 Structural bearings - Part 9: Protection
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1992-1-1:2023 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-1:2022 Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN ISO 21920-2:2022 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021)
EN ISO 4287:1998 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
EN ISO 683-1:2018 Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
ISO 3755:1991 Cast carbon steels for general engineering purposes

Tekninen komitea

CEN/TC 167 Structural bearings »

Direktiivi

89/106/EEC Rakennustuotedirektiivi
305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

29.11.2004

Julkaisupäivä

17.12.2004

Painos

1

Sivumäärä

34

Julkaisun kieli

englanti

Lisätiedot

Varmista hEN Helpdeskistä, onko standardin tämä versio CE-merkintään voimassa oleva versio.