ISO 28017:2018 specifies requirements for two types, seven classes and three grades of wire- or textile-reinforced dredging hoses with nominal sizes ranging from 100 to 1 200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater or freshwater mixed with silt, sand, coral and small stones with a specific gravity in the range from 1,0 to 2,3 at ambient temperatures ranging from -10 °C to +40 °C. ISO 28017:2018 covers two types of hose, as follows: - type 1: floating type, for delivery only, which includes flotation material to give the hose buoyancy; - type 2: submarine type for delivery and suction. ISO 28017:2018 does not specify requirements concerning the service life of hoses or hose assemblies. Specifying such requirements is the responsibility of the customer, in consultation with the hose manufacturer.
Tämän julkaisun valmistelusta Suomessa vastaa Kemesta ry, puh. 040 820 4888.
Sisällysluettelo
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 Classes
4.2 Grades
5 Materials and construction
5.1 Hoses
5.2 Flotation material
5.3 End fittings and end connections
6 Dimension and tolerances
6.1 Diameters
6.2 Hose assembly length
7 Physical properties
7.1 Rubber compounds
7.2 Performance requirements
7.3 Frequency of testing
8 Test certificate or report
9 Marking
10 Recommendations for packaging and storage
Annex A Type tests and routine tests (normative)
Annex B Measurement of adhesion between end fitting and lining (normative)
Annex C Hose assembly tensile-strength test (normative)
ISO 10619-1:2017 Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperature
ISO 1402:2009 Rubber and plastics hoses and hose assemblies -- Hydrostatic testing
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing
ISO 10619-1:2017 Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperature
ISO 1402:2009 Rubber and plastics hoses and hose assemblies -- Hydrostatic testing
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing
ISO 34-2:2015 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
ISO 4649:2010 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device
ISO 4662:2017 Rubber, vulcanized or thermoplastic -- Determination of rebound resilience
ISO 4671:2007 Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
ISO 7233:2016 Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum
ISO 8033:2016 Rubber and plastics hoses -- Determination of adhesion between components
ISO 8330:2014 Rubber and plastics hoses and hose assemblies -- Vocabulary