NEW!IEC 61010-2-201:2017 is available as IEC 61010-2-201:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-201:2017 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated manufacturing and industrial processes, e.g. discrete and continuous control.
This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition;
a) clarify, change, delete definitions which were causing confusion,
b) change and clarify the temperature testing methodology,
c) change documentation methodologies allowed,
d) change some terminal markings,
e) add clarity to some of the informative annexes,
f) add Annex E with changes,
g) add Annexes AA – FF.
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
EN 60027-1:2006 Letter symbols to be used in electrical technology - Part 1: General
EN 60027-1:2006/A2:2007 Letter symbols to be used in electrical technology - Part 1: General
EN 60027-2:2007 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
EN 60027-1:2006 Letter symbols to be used in electrical technology - Part 1: General
EN 60027-1:2006/A2:2007 Letter symbols to be used in electrical technology - Part 1: General
EN 60027-2:2007 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
EN 60027-3:2007 Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units
EN 60027-4:2007 Letter symbols to be used in electrical technology - Part 4: Rotating electrical machines
EN 60027-6:2007 Letter symbols to be used in elecrical technology - Part 6: Control technology
EN 60027-7:2010 Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution
EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60073:2002 Ihmisen ja koneen välisen rajapinnan perus- ja turvallisuusperiaatteet. Merkinantolaitteiden ja ohjaimien koodaus
EN 60309-1:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1997 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 1: Yleiset vaatimukset
EN 60309-1:1999/A11:2004 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999/A1:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999/A2:2012 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 1: Yleiset vaatimukset
EN 60309-2:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-2:1998 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 2: Mitoitusvaatimukset
EN 60309-2:1999/A11:2004 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999/A1:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999/A2:2012 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-4:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
EN 60309-4:2007/A1:2012 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
EN 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN 60320-1:2015/A1:2021 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
EN 60320-3:2014/A1:2021 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
EN 60332-1-2:2004/A1:2015 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
EN 60335-2-24:2010 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN 60335-2-24:2010/A1:2019 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN 60335-2-24:2010/A2:2019 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN 60335-2-89:2010 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
EN 60335-2-89:2010/A1:2016 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
EN 60335-2-89:2010/A2:2017 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
EN 60384-14:2013 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
EN 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
EN 60947-1:2007 Pienjännitekytkinlaitteet. Osa 1: Pienjännitekytkinlaitteet. Yleiset vaatimukset
EN 60947-1:2007/A1:2011 Low-voltage switchgear and controlgear - Part 1: General rules
EN 60947-1:2007/A2:2014 Low-voltage switchgear and controlgear - Part 1: General rules
EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
EN 60947-3:2009 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 60947-3:2009/A1:2012 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 60947-3:2009/A2:2015 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 60947-5-1:2017 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
EN 61010-1:2010 Mittaukseen, säätöön ja laboratoriokäyttöön tarkoitettujen sähköisten laitteiden turvallisuusvaatimukset. Osa 1: Yleiset vaatimukset
EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits
EN 61180-1:1994 High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements
EN 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
EN 61643-311:2013 Components for low-voltage surge protective devices - Part 311: Performance requirements and test circuits for gas discharge tubes (GDT)
EN 61643-321:2002 Components for low-voltage surge protective devices - Part 321: Specifications for Avalanche Breakdown Diode (ABD)
EN 61643-331:2003 Components for low-voltage surge protective devices - Part 331: Specification for metal oxide varistors (MOV)
EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
EN 61672-2:2013 Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
EN 61672-2:2013/A1:2017 Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
EN 62262:2002 Sähkölaitteiden kotelointien mekaanisen iskunkestävyyden lujuusluokat (IK-koodi)
EN 62471:2008 Photobiological safety of lamps and lamp systems
EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
EN IEC 60309-1:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
EN IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
EN IEC 60309-4:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock
EN IEC 60309-5:2019 Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)
EN IEC 60320-1:2021 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN IEC 60799:2019 Electrical accessories - Cord sets and interconnection cord sets
EN IEC 60799:2021 Electrical accessories - Cord sets and interconnection cord sets
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
HD 60364-4-442:2012 Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
HD 60364-4-443:2016 Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching
IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60245-1:2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60417-1:2002 Graphical symbols for use on equipment - Part 1: Overview and application
IEC 60529:2013
IEC 61051-2:1991 Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors
IEC 61643-21:2000 Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
IEC Guide 104:2010
IEC/TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
ISO 361:1975 Basic ionizing radiation symbol
ISO 7000:2014 Graphical symbols for use on equipment -- Registered symbols
ISO/IEC Guide 51:2014 Safety aspects -- Guidelines for their inclusion in standards