This document lays down rules for the representation of modular sizes, lines and grids on construction drawings. The basic module M is 100 mm (see ISO 1006). Generally, modular sizes are for use on design drawings, but can also be added to production drawings for manufacturing, orientation and location.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Designations of modular sizes
6 Representation of modular lines and sizes
6.1 General
6.2 Modular and multimodular lines
6.3 Modular line in an axial position
6.4 Circle for identification of modular line
6.5 Designation of modular line
6.6 Terminations for the size of a modular zone
7 Representation of modular grids
7.1 General
7.2 Modular grid with different line intervals
7.3 Indication of modular sizes
7.4 Indication of modular zones
7.5 Indication of a change in direction of a modular grid
7.6 Indication of the displacement of a modular grid
7.7 Indication of a modular line in an axial position
8 Combination of modular sizes and work sizes on the same drawing
ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and index
ISO 129-1:2018 Technical product documentation (TPD) -- Presentation of dimensions and tolerances -- Part 1: General principles
ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and index
ISO 129-1:2018 Technical product documentation (TPD) -- Presentation of dimensions and tolerances -- Part 1: General principles