Inland navigation vessels. Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels. Safety requirements and main dimensions (ISO 6218:2019)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels. Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified in this document. It also gives rules for designation and testing.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
4.1 General
4.2 Limitation of the actuating power for power-operated coupling devices
4.3 Strength requirements
5 Models
5.1 Operation
5.2 Position of handwheel/motor
5.3 With or without tensioning device
6 Design
6.1 Rope drum
6.2 Handwheel
6.3 Power-operated equipment
6.4 Combined operating modes
6.5 Arresting device
6.6 Protective device
6.7 Footbrakes for manually operated coupling devices
6.8 Brakes for power-operated coupling devices
6.9 Gears
6.10 Tensioning device for manually operated coupling systems
6.11 Change gear for manually operated coupling devices
6.12 Foundation
6.13 Guide track
7 Dimensions and characteristic values
7.1 General
7.2 Characteristic values
7.3 Main dimensions of the coupling device
7.4 Foundation
8 Material
9 Operating instructions and assembly instructions
ISO 2768-1:1989 General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
ISO 3730:2012 Shipbuilding and marine structures -- Mooring winches
ISO 4014:2011 Hexagon head bolts -- Product grades A and B
ISO 2768-1:1989 General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
ISO 3730:2012 Shipbuilding and marine structures -- Mooring winches
ISO 4014:2011 Hexagon head bolts -- Product grades A and B