ISO 18647:2017 gives requirements for the design, fabrication, installation, commissioning and integrity management of modular drilling rigs on offshore fixed platforms. The modular drilling rig includes some or all of the equipment as follows: - drilling equipment including a derrick/mast and its controls that can be moved by skidding a drilling support structure; - drilling support equipment which includes support facilities such as power supply/distribution system; - mud and cement storage, mixing, monitoring and control equipment. ISO 18647:2017 is applicable to the modular drilling equipment on offshore structures for the petroleum and natural gas industries, as follows: - new equipment arranged in a modularized form; - the equipment contained in several modules, each of which can be lifted and installed on to the platform, however, the equipment may be arranged within the modules as is convenient; - the modules assembled together offshore for hook up and commissioning; - intended for long term use on a new fixed offshore structure; - Intended for temporary use on a number of different offshore platforms. ISO 18647:2017 is not applicable to drilling equipment - installed on mobile offshore units, and - intended primarily for onshore use. ISO 18647:2017 does not apply to those parts and functions of an offshore platform that are not directly related to drilling.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Overall considerations
5.1 General
5.2 Functional equipment
5.3 Layout
5.4 Health and safety considerations
5.5 Operational considerations
5.6 Corrosion control
5.7 Structural considerations
5.8 Removal and abandonment
6 Design
6.1 General
6.2 Rig rating
6.3 Drilling equipment set
6.4 Drilling support equipment
6.5 Interfaces
7 Structural design
7.1 General
7.2 Structure simulation
7.3 Design checks
7.4 Material selection
7.5 Skid rail strength analysis
8 Construction and assembly
8.1 General
8.2 Planning
8.3 Equipment and materials handling
8.4 Structural steelwork fabrication
8.5 Welding and inspection
8.6 Prefabrication and installation of the piping
8.7 Outfitting
8.8 Corrosion control
8.9 Installation of equipment
8.10 Weighing
9 Pre-commissioning
9.1 Pre-commissioning scope
9.2 Pre-commissioning preparation
9.3 Hoisting equipment
9.4 Rotating equipment
9.5 Circulation and solids control equipment
9.6 Power and electrical equipment
9.7 BOP handling equipment
9.8 Cementing equipment
9.9 Pipe handling equipment
9.10 Fire and gas detection system equipment
9.11 Instrument
9.12 Hydraulic system
9.13 Skidding equipment
9.14 HVAC equipment
10 Installation, hook up and commissioning
10.1 Loadout and marine transportation
10.2 Installation
10.3 Hook up
10.4 Commissioning
11 Quality control, quality assurance and documents
12 In-service inspection and integrity management
13 Reuse
Annex A Additional information and guidance (informative)
Annex B Guidance for load and resistance factor design/working stress design method (informative)
Annex C List of typical fabrication design drawings and documents (informative)
Annex D Typical loadout and seafastening design documents (informative)
Annex E Typical acceptance report for an MDR on an offshore fixed platform (informative)
Annex F Typical completion acceptance document and record for an MDR on an offshore fixed platform (informative)
Annex G Typical in-service inspection plan for an MDR on a fixed offshore platform (informative)
API RP 14G:2007
API RP 2FB:2006
API RP 505:1997
API SPEC 16A + ERTA 1:2017
API SPEC 16D:2004
API STD 53 + ADD 1:2016
AWS D 1.1/D 1.1M:2015
IEC 61892-6:2013
ISO 13501:2011 Petroleum and natural gas industries -- Drilling fluids -- Processing equipment evaluation
ISO 13535:2000 Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment
ISO 13626:2003 Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures
ISO 13702:2015 Petroleum and natural gas industries -- Control and mitigation of fires and explosions on offshore production installations -- Requirements and guidelines
ISO 13703:2000 Petroleum and natural gas industries -- Design and installation of piping systems on offshore production platforms
ISO 14693:2003 Petroleum and natural gas industries -- Drilling and well-servicing equipment
ISO 15138:2007 Petroleum and natural gas industries -- Offshore production installations -- Heating, ventilation and air-conditioning
ISO 15513:2000 Cranes -- Competency requirements for crane drivers (operators), slingers, signallers and assessors
ISO 19901-3:2014 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 3: Topsides structure
ISO 19901-6:2009 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 6: Marine operations
ISO 19902:2007 Petroleum and natural gas industries -- Fixed steel offshore structures
ISO 4406:1999 Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications -- Specification