SFS-EN ISO 35101:2019:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

ISO 35101:2017 describes the working environment that can be expected when operating oil and gas facilities in Arctic environments/climate. ISO 35101:2017 provides principles and generic guidelines for the design and operation of fixed and floating oil and gas facilities both onshore and offshore.
The aim of ISO 35101:2017 is to ensure optimal health, safety, human performance and decision-making conditions for people working on oil and gas facilities in Arctic conditions.
ISO 35101:2017 applies to the design and operation of new facilities and structures, and to modification of existing facilities for operation in the Arctic environment. This also includes offshore and onshore exploration and accommodation units for such activities.
ISO 35101:2017 is divided into three main parts.
- The first part (Clause 5) describes the general principles and guidelines for risk management.
- The second part (Clause 6) describes the general working environment (working environment hazards found in many workplaces and provides some threshold limit values (TLVs) and design references that can be especially challenging in Arctic conditions.
- The third part (Clause 7 to Clause 9) addresses the climatic conditions expected in the Arctic. Clause 8 describes working environment design and technical solutions, while Clause 9 describes working environment operational requirements for prevention and management of cold-related problems.

Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.

Sisällysluettelo

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Risk management

5.1 General
5.2 Management of working environment risks in the design process
5.3 Mitigating measures — Risk reduction principles
5.4 Special assessment in Arctic environment

6 Management of working environment hazards in Arctic operations

6.1 General
6.2 Information on climate conditions
6.3 Illumination
6.4 Visibility
6.5 Physiological and psychosocial effects (human performance)
6.6 Noise and vibration
6.7 Hazardous chemicals
6.8 UV radiation
6.9 Wildlife

7 Environmental and cold climate preconditions

7.1 General
7.2 Metocean data
7.3 Assessment of the need for permanent weather protection
7.4 Area wind chill temperature (WCT) — CFD simulations

8 Working environment design philosophy and technical solutions

8.1 General
8.2 Design process and design requirements for Arctic conditions
8.3 Enclosures for weather protection
8.4 Anti-icing, anti-freezing and de-icing
8.5 Anti-icing and anti-freezing measures
8.6 De-icing measures
8.7 Work areas and access ways protection
8.8 Falling ice protection
8.9 Anti-slip systems
8.10 Cold surfaces protection
8.11 Safety equipment
8.12 Heat tracing and insulation
8.13 Hospital
8.14 Living quarters
8.15 Cabins

9 Operational requirements for prevention and management of cold-related problems

9.1 General
9.2 Buddy control system
9.3 Background
9.4 Cold risk management system
9.5 Cold risk assessment
9.6 Clothing and personal protection regimes
9.7 Fitness for work in the Arctic environment
9.8 Health and stress management
9.9 First aid and medical provision

10 Education, training and supervision

Annex A Working environment studies and deliverables in project development (informative)
Annex B Assessment of weather protection (informative)

Bibliography

Näytä kaikki

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Risk management

5.1 General
5.2 Management of working environment risks in the design process
5.3 Mitigating measures — Risk reduction principles
5.4 Special assessment in Arctic environment

6 Management of working environment hazards in Arctic operations

6.1 General
6.2 Information on climate conditions
6.3 Illumination
6.4 Visibility
6.5 Physiological and psychosocial effects (human performance)
6.6 Noise and vibration
6.7 Hazardous chemicals
6.8 UV radiation
6.9 Wildlife

7 Environmental and cold climate preconditions

7.1 General
7.2 Metocean data
7.3 Assessment of the need for permanent weather protection
7.4 Area wind chill temperature (WCT) — CFD simulations

8 Working environment design philosophy and technical solutions

8.1 General
8.2 Design process and design requirements for Arctic conditions
8.3 Enclosures for weather protection
8.4 Anti-icing, anti-freezing and de-icing
8.5 Anti-icing and anti-freezing measures
8.6 De-icing measures
8.7 Work areas and access ways protection
8.8 Falling ice protection
8.9 Anti-slip systems
8.10 Cold surfaces protection
8.11 Safety equipment
8.12 Heat tracing and insulation
8.13 Hospital
8.14 Living quarters
8.15 Cabins

9 Operational requirements for prevention and management of cold-related problems

9.1 General
9.2 Buddy control system
9.3 Background
9.4 Cold risk management system
9.5 Cold risk assessment
9.6 Clothing and personal protection regimes
9.7 Fitness for work in the Arctic environment
9.8 Health and stress management
9.9 First aid and medical provision

10 Education, training and supervision

Annex A Working environment studies and deliverables in project development (informative)
Annex B Assessment of weather protection (informative)

Bibliography

Tuoteryhmä(t)

75.020 Öljyn ja maakaasun jalostaminen »

Sidokset

Velvoittavat viittaukset

EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
EN 12464-1:2021 Light and lighting - Lighting of work places - Part 1: Indoor work places
EN 12464-2:2014 Light and lighting - Lighting of work places - Part 2: Outdoor work places

Tekninen komitea

CEN/TC 12 Oil and gas industries including lower carbon energy »

Vahvistuspäivä

25.10.2019

Julkaisupäivä

29.10.2019

Painos

1

Sivumäärä

48

Julkaisun kieli

englanti