SFS-EN 1504-2

Soveltamisala

1 Soveltamisala
Tämä asiakirja määrittelee betonipinnan suojaukseen, betonin ja raudoitettujen betonirakenteiden säilyvyyden parantamiseen sekä uuteen betoniin ja kunnossapito- ja korjaustyöhön käytettävien aineiden ja niiden yhdistelmien tunnistamista,
toimintaa (mukaan lukien säilyvyysnäkökohdat), turvallisuutta ja vaatimustenmukaisuuden arviointia koskevat vaatimukset.
Tämä asiakirja käsittelee seuraavia betonipinnan suojausmenetelmiä:
— vettä hylkivä impregnointi
— impregnointi
— pinnoitus.
Rakennusten lattioissa käytettäviä aineita ja niiden yhdistelmiä, joiden tarkoitus ei ole suojata betonirakennetta tai palauttaa sen eheyttä, käsitellään standardissa EN 13813.
Jos tämän standardin mukaisia aineita ja niiden yhdistelmiä käytetään lattioissa, joihin kohdistuu merkittävä mekaaninen kuormitus, tulisi niiden täyttää myös EN 13813 vaatimukset.

Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).

Tuoteryhmä(t)

01.040.91 Rakennusmateriaalit ja rakentaminen (Sanastot) »
91.080.40 Betonirakenteet »
90.012.40 Suojaus- ja korjaustuotteet »

Sidokset

Velvoittavat viittaukset

EN 1015-3:1999 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
EN 1015-6:1998 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
EN 1015-7:1998 Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar

EN 1015-3:1999 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
EN 1015-6:1998 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
EN 1015-7:1998 Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar
EN 1062-11:2002 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing
EN 1062-3:2008 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability
EN 1062-6:2002 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability
EN 1062-7:2004 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties
EN 1081:2018+A1:2020 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
EN 12190:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
EN 12192-1:2002 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
EN 1240:2011 Adhesives - Determination of hydroxyl value and/or hydroxyl content
EN 1242:2013 Adhesives - Determination of isocyanate content
EN 12617-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
EN 13036-4:2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
EN 13294:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time
EN 13395-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13529:2003 Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack
EN 13578:2003 Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete
EN 13579:2002 Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation
EN 13580:2002 Products and systems for the protection and repair of concrete structures - Test Methods - Water absorption and resistance to alkali for hydrophobic impregnations
EN 13581:2002 Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
EN 13687-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
EN 13687-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)
EN 13687-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact
EN 13687-5:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock
EN 1504-1:1998 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
EN 1504-8:2016 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)
EN 1504-9:2008 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
EN 1770:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion
EN 1877-1:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent
EN 1877-2:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number
EN 206:2013+A2:2021 Concrete - Specification, performance, production and conformity
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN ISO 11358-1:2022 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2022)
EN ISO 2409:2020 Paints and varnishes - Cross-cut test (ISO 2409:2020)
EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
EN ISO 2808:1999 Paints and varnishes - Determination of film thickness (ISO 2808:1997)
EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
EN ISO 2811-1:2023 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2023)
EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
EN ISO 2812-1:2017 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)
EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
EN ISO 3219-1:2021 Rheology - Part 1: Vocabulary and symbols for rotational and oscillatory rheometry (ISO 3219-1:2021)
EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
EN ISO 3219:1994 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
EN ISO 3251:2019 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
EN ISO 3451-1:2019 Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2019)
EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
EN ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
EN ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
EN ISO 4628-5:2022 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2022)
EN ISO 5470-1:2016 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
EN ISO 7783:2018 Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2018)
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
EN ISO 9514:2019 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)
prEN 14630 Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method

Tekninen komitea

CEN/TC 104 Concrete and related products »

Direktiivi

89/106/EEC Rakennustuotedirektiivi
305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

30.05.2005

Julkaisupäivä

04.11.2005

Painos

1

Sivumäärä

41

Julkaisun kieli

suomi

Lisätiedot

Varmista hEN Helpdeskistä, onko standardin tämä versio CE-merkintään voimassa oleva versio.