SFS-EN 4681-001:2019

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document specifies the characteristics, test methods, qualification and acceptance conditions of single and multicore electric cables for general purpose with conductors in aluminium or copper-clad aluminium, intended for installation in aircraft electrical systems.
The insulation of these cables is designed to withstand aircraft voltages at a frequency not exceeding 2 000 Hz. Unless specified by individual product standards the maximum demonstrated voltage of rating of these cables is ac 115 V rms phase to neutral and 200 V rms phase to phase and 28 Vdc.
They are divided into types, the characteristics of which are given in the product standards. Unless otherwise specified in the product standard, the tests defined in this standard apply.

Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.

Sidokset

Velvoittavat viittaukset

ASD-STAN TR 4648:2009
EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 3475-201:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination

ASD-STAN TR 4648:2009
EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 3475-201:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination

EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass

EN 3475-203:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
EN 3475-301:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length
EN 3475-302:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 302: Voltage proof test
EN 3475-302:2006 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
EN 3475-303:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance

EN 3475-304:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance

EN 3475-305:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance

EN 3475-306:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors
EN 3475-307:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
EN 3475-307:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
EN 3475-307:2015 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
EN 3475-401:2002 Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing

EN 3475-402:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination
EN 3475-403:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking
EN 3475-404:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock
EN 3475-405:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature

EN 3475-406:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test

EN 3475-407:2002 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 407: Flammability

EN 3475-407:2005 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 407: Flammability
EN 3475-407:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : Flammability
EN 3475-408:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance
EN 3475-409:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing
EN 3475-410:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance

EN 3475-411:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
EN 3475-411:2014 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
EN 3475-411:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
EN 3475-412:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance
EN 3475-413:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test
EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
EN 3475-415:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature
EN 3475-416:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability
EN 3475-417:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness
EN 3475-418:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
EN 3475-418:2019 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
EN 3475-501:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through

EN 3475-501:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
EN 3475-502:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation
EN 3475-503:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
EN 3475-504:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion

EN 3475-505:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands

EN 3475-505:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN 3475-505:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN 3475-506:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity

EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
EN 3475-507:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating

EN 3475-507:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating
EN 3475-508:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
EN 3475-508:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
EN 3475-509:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability
EN 3475-510:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion
EN 3475-512:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
EN 3475-512:2021 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
EN 3475-513:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
EN 3475-513:2020 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
EN 3475-514:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
EN 3475-514:2014 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
EN 3475-515:2009 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance
EN 3475-601:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
EN 3475-602:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
EN 3475-603:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
EN 3475-603:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
EN 3475-603:2011 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
EN 3475-603:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
EN 3475-604:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation
EN 3475-604:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation
EN 3475-604:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation
EN 3475-605:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test
EN 3475-605:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test
EN 3475-605:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test
EN 3475-701:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor
EN 3475-701:2017 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor
EN 3475-702:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability

EN 3475-703:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking

EN 3475-704:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility
EN 3475-704:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility
EN 3475-705:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
EN 3475-705:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
EN 3475-705:2022 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
EN 3475-706:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability
EN 3475-707:2017 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 707: Stabilization of assembly
EN 3475-801:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801: Capacitance per unit length
EN 3475-802:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance
EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance
EN 3475-803:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation
EN 3475-804:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804: Velocity of propagation
EN 3475-805:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance
EN 3475-806:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation
EN 3475-807:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance
EN 3475-808:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk
EN 3475-809:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance
EN 3475-810:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss
EN 3475-811:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation
EN 3475-812:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR)
EN 3719:2018 Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
EN 3838:2010 Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN 3838:2022 Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN 4651:2014 Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
EN 4681-002:2012 Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 002: General
EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
ISO 2574:1994 Aircraft -- Electrical cables -- Identification marking

Tekninen komitea

ASD-STAN Aerospace »

Vahvistuspäivä

13.12.2019

Julkaisupäivä

14.10.2020

Painos

0

Sivumäärä

17

Julkaisun kieli

englanti