SFS-EN 4681-005:2019

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This European Standard specifies the characteristics of electrical wires AZ family for use in the on board:
? 115 V (phase to neutral) or 200 V (phase to phase) electrical network of aircraft.
? 230 V (phase to neutral) or 400 V (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas.
This cable family is used at operating temperature between ? 65 °C and 180 °C.

Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.

Sidokset

Velvoittavat viittaukset

ASD-STAN TR 6058:2018
EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 3475-201:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination

ASD-STAN TR 6058:2018
EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 3475-201:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination

EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass

EN 3475-203:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
EN 3475-301:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length
EN 3475-302:2006 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
EN 3475-303:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance

EN 3475-304:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance

EN 3475-305:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance

EN 3475-306:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors
EN 3475-307:2015 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
EN 3475-401:2002 Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing

EN 3475-402:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination
EN 3475-403:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking
EN 3475-404:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock
EN 3475-405:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature

EN 3475-406:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test

EN 3475-407:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : Flammability
EN 3475-408:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance
EN 3475-409:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing
EN 3475-410:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance

EN 3475-411:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
EN 3475-412:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance
EN 3475-413:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test
EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
EN 3475-415:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature
EN 3475-416:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability
EN 3475-417:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness
EN 3475-418:2019 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
EN 3475-501:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
EN 3475-502:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation
EN 3475-503:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
EN 3475-504:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion

EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN 3475-505:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
EN 3475-507:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating
EN 3475-508:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
EN 3475-509:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability
EN 3475-510:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion
EN 3475-512:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
EN 3475-512:2021 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
EN 3475-513:2020 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
EN 3475-514:2014 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
EN 3475-601:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
EN 3475-602:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
EN 3475-603:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
EN 3475-604:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation
EN 3475-605:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test
EN 3475-701:2017 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor
EN 3475-702:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability

EN 3475-703:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking

EN 3475-704:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility
EN 3475-705:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
EN 3475-705:2022 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
EN 3475-706:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability
EN 3719:2018 Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
EN 3838:2010 Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN 3838:2022 Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN 4681-001:2019 Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification
EN 4681-002:2012 Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 002: General
EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products

Tekninen komitea

ASD-STAN Aerospace »

Vahvistuspäivä

21.06.2019

Julkaisupäivä

14.10.2020

Painos

0

Sivumäärä

11

Julkaisun kieli

englanti