This document specifies the requirements for an intermediate coat to be applied over a primer for aerospace applications and with a topcoat for aerospace applications on top. The properties specified in this document are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837 and EN ISO 3270 and painted with primer listed in Table 1. Topcoat listed in Table 1 is to be applied on intermediate coat to this document. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions, etc.) should be determined by supplementary tests to confirm that the requirements of this document are met.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
EN 23270:1991 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984)
EN 2334:1997 Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys
EN 2379:2018 Aerospace series - Fluids for assessment of non-metallic materials
EN 23270:1991 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984)
EN 2334:1997 Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys
EN 2379:2018 Aerospace series - Fluids for assessment of non-metallic materials
EN 2435-001:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001: Minimum requirements
EN 2435-002:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance
EN 2435-003:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance
EN 2435-004:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance
EN 2435-005:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application
EN 3837:2019 Aerospace series - Paints and varnishes - Nature and method for surface preparation of test pieces in aluminium alloys
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
EN 4160:2011 Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
EN ISO 1518-1:2019 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2019)
EN ISO 1518-1:2023 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2023)
EN ISO 1520:2006 Paints and varnishes - Cupping test (ISO 1520:2006)
EN ISO 2409:2020 Paints and varnishes - Cross-cut test (ISO 2409:2020)
EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
EN ISO 2811-1:2023 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2023)
EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
EN ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
EN ISO 2811-3:2023 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)
EN ISO 2811-4:2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)
EN ISO 2812-2:2018 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018)
EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
EN ISO 3251:2019 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN ISO 3679:2022 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
EN ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
EN ISO 9514:2019 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)
ISO 18481:2017 Hydrometry -- Liquid flow measurement using end depth method in channels with a free overfall
ISO 3696:1987 Water for analytical laboratory use -- Specification and test methods
ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes -- End-depth method for estimation of flow in rectangular channels with a free overfall
ISO 4618:2014 Paints and varnishes -- Terms and definitions
SAE MA 4872A:2012