(1)P The scope of Eurocode 6 for Masonry Structures as given in 1.1.1 of EN 1996-1-1 applies also to this Part 2. (2)P Part 2 of Eurocode 6 gives basic rules for the selection of materials and execution of masonry to enable it to comply with the design assumptions of the other parts of Eurocode 6. With the exception of the items given in 1.1(3)P, the scope of Part 2 deals with ordinary aspects of masonry design and execution including: the selection of masonry materials; factors affecting the performance and durability of masonry; resistance of buildings to moisture penetration; storage, preparation and use of materials on site; the execution of masonry; masonry protection during execution; NOTE 1. Where general guidance only is given, additional guidance based on local conditions and practice may be made available in non contradictory complementary documents which may be referred to in the National Annex. NOTE 2. The scope of Eurocode 6 excludes seismic, thermal and acoustic functional performance of masonry structures; (3)P Part 2 of Eurocode 6 does not cover the following items: those aspects of masonry covered in other parts of Eurocode 6; aesthetic aspects; applied finishes; health & safety of persons engaged in the design or execution of masonry; the environmental effects of masonry buildings, civil engineering works and structures on their surroundings.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 1015-11:2019 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
EN 1015-17:2000 Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength
EN 1015-11:2019 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
EN 1015-17:2000 Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength
EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength
EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
EN 1052-3:2002/A1:2007 Methods of test for masonry - Part 3: Determination of initial shear strength
EN 1052-4:2000 Methods of test for masonry - Part 4: Determination of shear strength including damp proof course
EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
EN 13914-1:2016 Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-1:2022 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 206:2013+A2:2021 Concrete - Specification, performance, production and conformity
EN 771-1:2011+A1:2015 Specification for masonry units - Part 1: Clay masonry units
EN 771-2:2011+A1:2015 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-3:2011+A1:2015 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-4:2011+A1:2015 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2011+A1:2015 Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-6:2011+A1:2015 Specification for masonry units - Part 6: Natural stone masonry units
EN 845-1:2013+A1:2016 Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
EN 845-2:2013+A1:2016 Specification for ancillary components for masonry - Part 2: Lintels
EN 845-3:2013+A1:2016 Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar