Aerospace series. Paints and varnishes. Two-components room temperature curing polyurethane finish. High flexibility and chemical agent resistance for military application
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
This document specifies the requirements for a two-components flexible polyurethane topcoat to be applied over EN 4687 and/or EN 4688 primers mainly for exterior aerospace applications. The primer and the finish tested to this document will be from the same manufacturer applied in accordance with (i.a.w.) their instructions/Table 1.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
ASD-STAN prEN 6042:1995
BS 1595-1:1986
DEF STAN 68-10:2003
ASD-STAN prEN 6042:1995
BS 1595-1:1986
DEF STAN 68-10:2003
EN 2101:1991 Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys
EN 2334:1997 Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys
EN 2437:2001 Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
EN 3837:2019 Aerospace series - Paints and varnishes - Nature and method for surface preparation of test pieces in aluminium alloys
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
EN 3847:2019 Aerospace series - Paints and varnishes - Determination of sedimentation rating
EN 4160:2011 Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
EN 4687:2021 Aerospace series - Paints and varnishes - Chromate free (non corrosion inhibiting) two-components cold curing primer - Chromate free primer for military application
EN 4688:2021 Aerospace series - Paints and varnishes - Corrosion resistant chromated two-components room temperature curing epoxy primer - High corrosion resistance for military application
EN 4704:2012 Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
EN ISO 11664-1:2011 Colorimetry - Part 1: CIE standard colorimetric observers (ISO 11664-1:2007)
EN ISO 11664-2:2011 Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007)
EN ISO 11664-3:2013 Colorimetry - Part 3: CIE tristimulus values (ISO 11664-3:2012)
EN ISO 11664-4:2011 Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008)
EN ISO 11664-5:2016 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (ISO/CIE 11664-5:2016)
EN ISO 11664-6:2016 Colorimetry - Part 6: CIEDE2000 Colour-difference formula (ISO/CIE 11664-6:2014)
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
EN ISO 11909:2007 Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)
EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
EN ISO 1518-1:2019 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2019)
EN ISO 1518-1:2023 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2023)
EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
EN ISO 1520:2006 Paints and varnishes - Cupping test (ISO 1520:2006)
EN ISO 1524:2020 Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020)
EN ISO 16474-1:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013)
EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
EN ISO 2409:2020 Paints and varnishes - Cross-cut test (ISO 2409:2020)
EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
EN ISO 2811-1:2023 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2023)
EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
EN ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
EN ISO 2811-3:2023 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)
EN ISO 2811-4:2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)
EN ISO 2812-1:2017 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)
EN ISO 2812-2:2018 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018)
EN ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
EN ISO 3251:2019 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN ISO 3679:2022 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
EN ISO 4628-8:2012 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
EN ISO 6270-1:2018 Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)
EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
EN ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
EN ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012)
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN ISO 9227:2022 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
EN ISO 9514:2019 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)
EN ISO/CIE 11664-1:2019 Colorimetry - Part 1: CIE standard colorimetric observers (ISO/CIE 11664-1:2019)
EN ISO/CIE 11664-2:2022 Colorimetry - Part 2: CIE standard illuminants (ISO/CIE 11664-2:2022)
EN ISO/CIE 11664-3:2019 Colorimetry - Part 3: CIE tristimulus values (ISO/CIE 11664-3:2019)
EN ISO/CIE 11664-4:2019 Colorimetry - Part 4: CIE 1976 L*a*b* colour space (ISO/CIE 11664-4:2019)
EN ISO/CIE 11664-6:2022 Colorimetry - Part 6: CIEDE2000 colour-difference formula (ISO/CIE 11664-6:2022)
MIL-DTL-83133:2010
MIL-PRF-23699:1997
MIL-PRF-5606:2002
MIL-PRF-6081:2009
SAE AMS 1526B:1990
SAE AMS 1527B:1990
SAE AMS 1533A:1991