SFS-EN 13445-8:2021:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document specifies requirements for unfired pressure vessels and their parts made of aluminium and aluminium alloys in addition to the general requirements for unfired pressure vessels under EN 13445:2019 Parts 1 to 5. This document specifies unfired pressure vessels for loads up to 500 full cycles.

NOTE Cast materials are not included in this version. Details regarding cast materials will be subject to an amendment to or a revision of this document.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

23.020.30 Painelaitteet »

Sidokset

Velvoittavat viittaukset

CEN ISO/TR 15608:2013 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2013)
EN 10204:2004 Metallic products - Types of inspection documents
EN 12392:2000 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment

CEN ISO/TR 15608:2013 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2013)
EN 10204:2004 Metallic products - Types of inspection documents
EN 12392:2000 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
EN 13445-1:2021 Unfired pressure vessels - Part 1: General
EN 13445-2:2021 Unfired pressure vessels - Part 2: Materials
EN 13445-3:2021 Unfired pressure vessels - Part 3: Design
EN 13445-4:2021 Unfired pressure vessels - Part 4: Fabrication
EN 13445-5:2021 Unfired pressure vessels - Part 5: Inspection and testing
EN 485-2:2013 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 586-2:1994 Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements
EN 754-2:2013 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN ISO 10042:2005 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005)
EN ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
EN ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
EN ISO 17637:2011 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003)
EN ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
EN ISO 23277:2009 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)
EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
ISO 857-1:1998 Welding and allied processes — Vocabulary — Part 1: Metal welding processes

Tekninen komitea

CEN/TC 54 Unfired pressure vessels »

Direktiivi

2014/68/EU

http://ec.europa.eu »

Vahvistuspäivä

21.05.2021

Julkaisupäivä

25.05.2021

Painos

4

Sivumäärä

38

Julkaisun kieli

englanti